Nozzle Performance Chart
MAXFLOW Mpro 25
| Nozzle Size | Working Pressure (PSI) | Flow Rate (GPM) | Voltage | Amperage | Cleaning Units (CU)* |
|---|---|---|---|---|---|
| 3.5 Δ | 1044 | 1.81 | 121.8 | 13.8 | 1890 |
| 4.0 Δ | 1023 | 2.05 | 121.8 | 13.7 | 2097 |
| 4.5 | 975 | 2.25 | 121.7 | 13.4 | 2194 |
| 5.0 Δ | 899 | 2.30 | 121.7 | 12.6 | 2068 |
Δ: May compromise performance and cause malfunction.
Recommended and included for optimal performance.
* CU = Working Pressure (PSI) × Operating Flow Rate (GPM).
MAXFLOW MX3
| Nozzle Size | Working Pressure (PSI) | Flow Rate (GPM) | Voltage | Amperage | Cleaning Units (CU)* |
|---|---|---|---|---|---|
| 1.2 Δ | 2230 | 0.90 | 121 | 14.9 | 2003 |
| 1.3 Δ | 2209 | 0.98 | 121 | 14.9 | 2159 |
| 1.4 Δ | 2198 | 1.00 | 121 | 14.9 | 2207 |
| 1.5 | 2167 | 1.08 | 121 | 14.8 | 2347 |
| 2.0 Δ | 1860 | 1.29 | 121 | 14.8 | 2408 |
Δ: May compromise performance and cause malfunction.
Recommended and included for optimal performance.
* CU = Working Pressure (PSI) × Operating Flow Rate (GPM).
MAXFLOW Mpro 30 (DDM) - Gravity Feed
| Nozzle Size | Pressure - 20A (PSI) | Pressure - 15A (PSI) | Flow - 20A (GPM) | Flow - 15A (GPM) | Guidance |
|---|---|---|---|---|---|
| 4.0 | 1,009 | 977 | 2.05 | 2.01 | Recommended |
| 4.5 | 825 | 802 | 2.05 | 2.01 | Recommended |
| 5.0 | 634 | 609 | 2.05 | 2.02 | Reference |
| 5.5 | 570 | 559 | 2.03 | 2.02 | Reference |
| 6.0 | 511 | 505 | 2.03 | 2.01 | Reference |
Recommended nozzle sizes for gravity-feed operation.
Recommended Gravity-Feed Condition: Feed Height 0.5 m (19.7 in) • Nozzle Size 4.0 or 4.5 • Effective Tank Volume 200 L (52.8 gal)
Basic Parameters: Feed height measured center-to-center from tank outlet to machine inlet. Inlet pressure during testing: 0.8–1.3 PSI.
Values shown are measured results for the stated setup. Actual field performance may vary depending on water level, hose routing, fittings, filtration, and restrictions.
Machine inlet diameter: 1.25 in • Tank outlet fitting diameter: 1.25 in